Presence Control PRO IR Quattro SLIM KNX

Genuine 16 m2 of presence detection concentrated on 4 mm. Control PRO IR Quattro SLIM KNX presence detector for indoors, ideal for small offices, store, service and utility rooms, washrooms and WCs, for mounting at a height of up to 4 m, for switching light ON and OFF, square presence detection zone covering 16m², high-quality retina lens.

Version

About Presence Control PRO IR Quattro SLIM KNX

Extremely slim. Incredibly sensitive.

Modern buildings are planned down to the very last detail both in technical terms as well as from a design perspective. This should also apply to the sensors that are fitted in them. Thanks to its minimal installed height of just 4 mm, the IR Quattro SLIM fits perfectly into any ceiling structure. Its detection performance is all the more astonishing: installed at a height of up to a maximum 4 metres, the world’s only retina lens has a genuine presence detection zone of an astounding 16 m². Where no movement escapes the sensor. Despite its slimline design.

Technical Specifications
Model
Presence detector
Dimensions (h x w x d)
77 x 77 x 60 mm
Power supply
KNX bus voltage
Sensor type
Passive infrared
Application
inside buildings
Installation
Ceiling
Recommended installation height
2.5-4 m
Square presence detection zone
4 x 4 m max. (16m²)
Square radial detection zone
4 x 4 m max. (16m²)
Square tangential detection zone
4 x 4 m max. (16m²)
Sensor system
PIR with retina lens and hexagonal Fresnel structure
Settings
by means of ETS software, remote control or bus
Lighting channels Light 1 – Light 4
Switching/dimming, switching mode, constant lighting control, stay-ON time
Basic brightness
Permanently ON, 1 – 255 min, 10-50% = all night
Switch-'ON' delay
Room surveillance, 0-255 min., Stay-ON time 1-255 min.
Presence stay "ON" time output
1-255 sec. or 1-255 min.
HVAC output
depending on presence
Further outputs
Light level, sabotage protection
Light level output
in lux
Degree of protection (IP)
IP20
Protection class
II
Temperature range
0-+40
IQ mode
Yes
Interface
KNX